There was an elevator cannibalism, and one person was so sad. What are the safe areas and some basic safety knowledge of escalators? Follow fuji Escalator Manufacturer to take a look. 1. In case of emergency, press the stop button. The emergency stop button is usually under the escalator operation indicator, and both the upper and lower ends of the escalator can be seen. In the event of an emergency such as a passenger falling down on the escalator, the person closest to the emergency stop button can press the button immediately, and the escalator will stop automatically and slowly within 2 seconds. 2. Stepping on » 1″ and jumping on » 2″ may not be correct. When the elevator rises to the top, the steps are connected to two or three elevator pedals after advancing several steps in parallel. Passengers stepped on the pedals from the steps to the ground. Since the woman in the Hubei elevator accident was involved in the elevator due to loose pedals, some people think that the pedal closest to the step is real and can be stepped on, while the second one is empty and may collapse. do not step on it and draw a picture to indicate stepping on » 1″ to jump on » 2″. however, the elevator industry pointed out that stepping on » 1″ to jump on » 2″ is not completely accurate. Because this should be compared with enterprise products. If the leading edge plate is pressed under the handrail entrance and fixed with screws, it is a non-detachable part, and there will be no risk of overturning or falling. But if it is a split structure, there are certain risks. 3. Pay attention to the yellow border strip around the steps of the comb-plate escalator. This border strip is designed to ensure that passengers will not be trapped by various gaps in the escalator. The surface of the step is uneven. In order to facilitate passengers to transition up and down, comb plates are arranged between the step and the pedal. This is the safety protection device of the escalator. There is a micro switch behind the comb plate. If foreign matter gets stuck, the escalator will stop running. Therefore, when you step into or leave the escalator, you must pay attention to your feet. If the comb plate is damaged and your toes step on the damaged place, you will probably get pinched. 4. There is a certain gap at the edge of the elevator far away from the edge of the elevator. Take the elevator to the middle station slightly and do not cling to the edge to avoid accidents. 5. Tie your shoelaces. When you sit in the elevator, tie your shoelaces properly so as not to get stuck by the elevator and avoid injury. 6. No slapstick. Don’t let the child ride alone. Even if the parents follow, they can’t let him slapstick on the elevator to avoid accidents.
information about Escalator Manufacturer : https://www.fujihd.net/escalators/
Escalator Manufacturer Share 3 Design Secrets of Escalator:1. The handrail belt and the step move in the same direction, but their speed is actually different: the handrail belt is 2% faster than the step. Because many people, especially the elderly, will grasp the armrest when riding, the relatively faster speed can stretch the arm and […]
Escalator Manufacturer share how to properly clean stainless steel:First, the requirements for detergent ingredients 1. A neutral detergent or detergent must be used.2. It is not allowed to contain an acidic substance, particularly a chlorine-containing acid or a chlorine-containing substance, followed by sulfuric acid, sulfurous acid, and an oxidizing acid. 3. The cleaning agent should […]